Power on
Open the case by pulling up on the latch at front. Be sure to close it again securely before using it in a wet environment. You should here an audible click when it snaps shut.
To power on, slide the on/off switch at the lower left to the on position. If it is the first time use the display will show quick tips on the button and joystick controls. Once you enter the menu system and exit saving changes it will no longer show quick tips and go straight to real time pressure view.
If no Senders are connected, it will display a waiting message until it hears from a Sender unit.
Charging
To charge, open the lid and use the red usb charge cord supplied. The regular usb plug-in can go to any powered usb outlet. The other end is magnetic and when placed near the charge connector will attach itself and start charging.
